Click the button to learn more and place an order.
Rocna Anchors
11 Redeems
The Rocna anchor was designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boats since the early 1960’s. Over 100,000 nautical miles of cruising, Peter experienced the same anchoring problems that are still prevalent today – needing to carry a variety of anchors to suit various seabeds, yet still the anchors dragged and boaters felt insecure.
“Your anchor should provide you and your crew with reliability, security, and confidence,” says Peter. A lifetime of nautical experience worldwide was poured into an anchor – initially conceived for Peter’s own use – which became the Rocna.
AN INDEPENDENTLY TESTED NEW GENERATION DESIGN
Peter’s solution consistently returns top results in objective and independent testing. Since its launch in 2004, the Rocna has led worldwide anchor tests as published in the likes of SAIL, Yachting Monthly, Practical Boat Owner, Voile, and others. Because of the Rocna’s reliable and convincing performance against its competition, Rocna is trusted to be rock solid in the real world. You don’t need to take our word for it.
FOR ALL WHO NEED RELIABILITY FROM PERFORMANCE
Rocna anchors are performing in some of the world’s toughest locales, including Patagonia, Antarctica, Alaska, Greenland, Scotland – as well as enduring temperamental tropical weather. Rocna has “buy-in” from respected boaters whose opinions matter, from Steve Dashew to Jimmy Cornell. Southern lattitudes sailing pioneer Jérôme Poncet reports: “It took me years with many trials to achieve, in discovering the Rocna anchor, foolproof holding power…”
PRECISION SETTING
The roll-bar ensures that the anchor always arrives at the ideal angle for penetration, and the setting skids guide the fluke tip which acts as a sharp chisel cutting into the seabed. With a third of the anchor’s weight on its fluke tip, an instant reliable set is ensured with every use.
ROCK SOLID HOLDING POWER
Of all anchor types, a concave fluke gives the greatest resistance, and through clever design Rocna provides the largest fluke area possible. In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocna’s chisel tip ensures that it cuts through and bites deep.
MAXIMUM VERSATILITY
The Rocna is a true multi-purpose anchor that sets and holds in most seabeds, from soft mud to hard sand, clay, grass, and kelp.
RESISTANT TO WIND AND TIDE SHIFTS
A Rocna remains stable and buried, and does not roll out on reversal or veering of load, or if dragged beyond yield, providing enhanced security.
HIGHEST QUALITY BUILD AND FINISH
Compare the welds and finish on a genuine Rocna anchor to alternatives. We believe a top performing product should be built like one, and we spend a lot of time and resources on production and quality control procedures to ensure that this is the case.
HIGH TENSILE STEEL SHANK
Rocna anchors are designed – and built – for strength and durability.
SELF-DEPLOYING AND SELF-RECOVERING
The Rocna shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.
GUARANTEED FOR LIFE
Each Rocna anchor comes with a Lifetime Warranty against both breakage and bending in addition to manufacturing defects.
COMPETITIVELY PRICED WITH WIDE PRODUCT RANGE
Rocna anchors are available in 14 sizes from 4 kg (9 lb) – 275 kg (606 lb) to suit all vessels from small boats to small ships. Larger sizes available on request. Galvanized and stainless-steel options are available in all sizes.
Terms and conditions apply. Only available at Brierley Marine. Please contact Brierley Marine for full details.
Business Name
Brierley Marine
About Brierley Marine
Brierley Marine started in 1986 in Hobart Tasmania.
We are a P/L business with two Tasmanian directors – John and Sue Brierley.
We have 20 staff including three sales representatives based in our Hobart & Launceston branches, internal sales staff, accounts personnel, warehouse staff and fitters to repair and add onto the equipment we sell.
Our warehouse showrooms are located at 1 Lampton Avenue Derwent Park, and 130 Forster Street, Invermay and have 2000m² of floor space.
We service the aquaculture, mining, forestry, transport, rural and food industries, as well as government departments with an extensive range of quality products – browse our website for more information.
Our prices are competitive, and we can supply customers nationally.
Phone: 03 6273 4278 (Hobart) or 03 6337 8466 (Launceston)
Contact Brierley Marine
Phone: 03 6273 4278
Email: sales@brierleyhose.com.au
Store Locations
Addresses
Brierley Marine Derwent Park
Phone: 03 6273 4278
Address: 1 Lampton Ave, Derwent Park, TAS 7009
Brierley Marine Invermay
Phone: 03 6337 8466
Address: 279 Invermay Rd, Invermay, TAS 7248